Reversing Cameras and Sensors

Fiat Ducato reversing light / camera system that is suitable for all Fiat Ducato / Peugeot Boxer / Citroen Jumper van conversions from 2006 onwards. Viewing angle on the Camera is 170 degrees. Super CMOS. Night Vision. NTSC. IP67.

CCD Night Vision NTSC Waterproof

20m cable included IR night vision Rear fixing Wide angle Heavy duty Universal Twin Lens

Heavy-duty design with IP67 white water proof housing, 12-24V, camera turns on when monitor is on or when reversing, intelligent backlight compensation and integrated microphone. Technical Specifications: Image Device: 1/3inch CCD Image Sensor. Illumination: 1 lux (LED on. Signal-To-Noise Ratio: Better Than 45dB. Field Of View: 120 Degree. IR Wave Length: 850nmIR LED. Video Cable: 20m.

Night vision Front and Rear Wide angle Adjustable Lens 8m cable included

Brake Light D1 resolution camera designed for use in VW Crafter (2017-present) and MAN TGE (2016-present) vehicles. The camera is IP68 rated for its dust-tight properties and suitability for continuous immersion in water under specified conditions. It benefits from a 150? wide-angle view for enhanced visibility and eight LED lights with a range of 8-10 meters distance also contributing to enhanced...

12-24V DC PAL / NTSC 2 Video inputs 1 Audio input

7" Mirror Mount Monitor with white 28mm night vision camera. Monitor:- Either clip onto rear-view mirror or use the universal mounting bracket, high resolution, touch screen, 12-24V DC, PAL / NTSC, 2 video inputs, 1 audio input. Camera: Heavy-duty design with IP67 white water proof housing, 12-24V, camera turns on when monitor is on or when reversing, intelligent backlight compensation and integrated...

7" TFT LCD Monitor, 16:9 widescreen, detachable sun shield,12-24V DC, 2 video inputs, 1 audio input.

This monitor is similar spec to the monitor included in many of our Parksafe Automotive range, however this version is a slimline version. Instead of clipping on to the vehicles' existing rear view mirror, you simply remove the mirror altogether, and coupled with the relevant vehicle mount (bought separately) you completely replace the mirror for the monitor. This version is very slim and will enhance...

Parksafe power adaptor. Works in conjunction with item 34885 (power lead) and is required when installing the 34834 reversing monitor.

Parksafe adaptor lead. Works in conjunction with item 34886 (power adaptor) and is required when installing the 34834 reversing monitor.

Overhead bulkhead monitor mounting bracket.

Mounting bracket from Parksafe for fitting the or 34864 Mirror monitor to all vehicles. This kit contains extra strong loctite glue for mounting directly to the windscreen.

Optional Added Display (PS62 / PS63 / PS64) Sensor installation height adjustable Towbar detectable function Paint able sensors 19mm 4 Stage audible buzzer 4 Sensor system

IP68 Waterproof Up to 30m Wireless Operation 3 Colour LED Display with buzzer & mute function Self Test Towbar / Spare Wheel Ignore function 18.5 mm Rubber angled sensor 2.4m (Male to Male) Sensor cable(s)

Comes with LED lights for visible readout and also numeric distance marker in CM Can be mounted to either the dash of the vehicle or the front / rear inner roof Mute Function