Grid
List
Bravo 8 Foot Pump
Bravo 8 Foot Pump
A robust 6.5 litre foot pump suitable for small beach boats, kayaks, SUP's and air beds.Reinforced fabric coated bellows & all stainless steel metal parts.
Large capacity 6.5 litres
All stainless steel parts
Max pressure 300mbar 4.4psi
32cm x 23cm x 7cm high
Supplied with crush resistant hose and universal adaptors
Bravo BTP 12 (analogue) High Pressure Pump
This high pressure electric inflator/deflator pump features twin pumps which switch automatically at the appropriate pressure. A high volume/ low pressure turbine pump and a high pressure/low volume piston pump. Automatic pressure cut off is monitored and controlled by a rotating pressure gauge.
Dual 12V high pressure pump
1 bar, 14.5psi
Power by cigarette lighter socket or battery clamps
Turbine...
Dinghy Launching Wheels
Inexpensive dinghy launching wheels can be easily attached to the transom of your tender so you will easily be able to wheel your tender anywhere over hard sand and paved surfaces. You will no longer risk damaging your tender by dragging it, or struggle to carry it!
The wheels are made from lightweight, robust ABS plastic which is resistant to outdoor elements, they will not rust, corrode or deteriorate...
Fiamma Carry Bike T5/T6 Pro Rack Holder (98656-895)
A replacement black plastic clip designed to hold a Carry Bike rail holder in the up position when it is not carrying bikes. This clip is for use of Volkswagen T5 Pro and Volkswagen T6 Pro Fiamma VW Carry-Bike bicycle racks.
Halkey Roberts Inflatable Boat/Kayak/SUP Replacement Valve
Halkey Roberts replacement valve suitable for all inflatable boats, kayaks and SUP's with this particular valve system.
Supplied as a 3 part system, inside, outside and valve cap.
Threaded assembly for easy installation
Sprung loaded centre valve pin for easy deflation
Following markings on the main body of the valve: HRC PAT. NO. 4.478.587 & 690NSBV
Hand pump ABS
Double action hand pump, takes the backache out of inflating fenders, tenders or SUP. Comes complete with hose and nozzle fittings.
Inflation Bayonet Adaptor For Dinghy Valves
Bayonet adaptor for inflatable boat and kayak valves.
This HP valve adaptor will fit most makes of inflatable dinghies Seago, Waveline, Plastimo, Wetline.
Insta-Lok Snap Davit Kit - Grey
Providing a safer option for entering or exciting an inflatable tender as well as practical storage, the Polymarine Insta-lock Snap Davit kit comprises of 2 spring loaded davit heads which secure to the Swim Platform and 2 Pads with lock-on-bars which are glued onto the Inflatable. When aligned the sprung loaded davit heads snap onto the lock-on-bar. The dinghy is firmly locked to the Host Craft ready...
Jabsco Rule iD20 Hi-Speed Dinghy Inflator/Deflator 12V
Jabsco Rule's High Speed Inflator / Deflator
ID20 is a 12V portable pump with multiple valve options and a high power motor (300W) that provides quick inflation and deflation for large inflatables.
The Rule High Speed Inflator/Deflator can inflate a typical 4-man dinghy in under 2 minutes (or a 10 ft x 6 ft x 22" family inflatable pool).
Adjustable nozzles are included for most inflatables...
Lalizas Double Action Stirrup Pump
Lalizas has designed the practical and highly effective Double Action Hand/Floor Pump ideal for inflating or deflating dinghies, ski tubes, air matresses plus many more inflatable products. To inflate or deflate simply fasten the air tube to the appropriate connection (“Inflate” or “Deflate”) and pump with steady up and down strokes.
The Pump also features an adjustable pressure...
Meridian Zero Rechargeable Air NRG 6000, 16psi HP Pump & Integral Battery
Set your chosen pressure on the digital, rechargeable Air NRG 6000 at up to 16psi and the pump will shut off at the right moment.
Charge by 12V DC (cigarette lighter socket) & 240V Mains
Maximum pressure 16psi
Battery 6000mAh Lithium Battery
Inflate at 350 litres/min low pressure falling to 70 litres/minute at high pressure.
Two USB spare resource outputs, 1Amp & 2Amp
Triple...
Scanstrut ATMOS 12V Brushless Integrated Airstation
ATMOS, by Scanstrut, will revolutionize your family’s boating experience. This beautifully designed, in-built air station is here to maximize quality time on the water.
At the push of a button, ATMOS is ready to inflate your paddleboards, towables and more: simply set the target pressure and let ATMOS do all the hard work.
Utilizing Scanstrut’s outdoor technology DNA, this is waterproof...
Seago Dinghy Wheels Transom Quick Release Bracket
Dinghy Dolly Wheel Brackets
The best way to attach your dolly wheels to your boat.
The easy to fit bracket attaches to the transom and remains in place.
The dolly wheels simply slide into the bracket locking in place.
The Wheels can be removed anytime quickly by pressing the release button and sliding the wheels off.
Sold as a pair
Waveline rechargeable air pump
Waveline air pump - designed for life on the go
Inflates up to 20 psi.