Wade
Grid
List
Brass Bulkhead Coupling 1/2" Tube 3/4
A bulkhead compression coupling made of brass, with two 1/2' compression connections. This compression bulkhead fitting is suitable for a 3/4' cut out.
Brass Female Stud Coupling 15mm x 1/2" BSP
A female stud compression coupling in brass, supplied with compression olive and nut. The compression union has a 1/2' BSP female thread one end and a 15mm compression fitting the other end.
Brass Hose Tail Connector 1/4" BSP Nut to 1/4" Spigot
Wade compression hose connection made from brass in a straight orientation. This hose tail union has a 1/4' thread one end and a 1/4' hose tail the other.
Brass Straight Coupling 3/8" x 15mm
A straight compression coupling made from brass with a 3/8' compression on one end and a 15mm compression the other end. This coupling is supplied with compression nuts and olives.
Wade Brass Blanking Nut 3/8" BSP
Pipe blanking nut made from brass with a 3/8' BSP tapered female thread. This blanking cap / nut acts as a stopper for male threaded pipes.
Wade Compression Tee Piece (4mm Each End)
The Wade compression T piece is constructed from brass in a T-shaped configuration (also known as a tee piece). This equal T piece has a 4mm compression at each end.
Wade Gas Test Point Elbow 3/8" x 3/8
Elbow fitting suitable for use in the gas line to allow a gas test point to be connected. This testing point features two compression ends with nuts and olives and a connection for a testing point.
This testing point is suitable for use in 3/8' outside diameter gas lines.
Wade Gas Test Point Elbow 5/16" x 5/16
Elbow fitting suitable for use in the gas line to allow a gas test point to be connected. This testing point features two compression ends with nuts and olives and a connection for a testing point.
This testing point is suitable for use in 5/16' outside diameter gas lines.
